anodizing aluminum rectifier 30v 300a
Specification
| SPECIFICATIONS FOR GKD30-300CVC |
| Input AC | 240V±10% | 1phase | 50/60Hz |
| Output DC | Volt | 0~30V Adjustable |
| Current | 0~300A Adjustable |
| Power | 9KW |
| Efficiency | >85% |
| output Frequency | 40KHz fixed |
| Protection | Short circuit protection
Overheating protection
Phase lack protection
Input over/low voltage protection |
Working Condition
(Temperature) | -10℃~50℃ | Control mode | Panel control
Remote control |
| Net weight | 35kg | Working mode | Constant Voltage(CV)
Constant Current(CC) |
| Dimension(mm) | 690*550*520mm | Cooling way | Air cooling |
Characteristics of aluminum anodized dc rectifier:
Aluminum anodic oxidation DC rectifier is used for anodizing aluminum. This process is actually the process of forming aluminum oxide film from aluminum profile or aluminum alloy profile by electrolytic aluminum surface. Our rectifiers also include imitation gold electroplating power supply, pulse electroplating rectifier, high-frequency electroplating power supply,
A. Digital timing system;
B. Ampere hour meter;
C. Standard interface;
D. Control signal interface.
How to install rectifier
This is installation way for remote control rectifier. Not only this way.
1. To connect copper bar with bath/tank
2. To ensure power supply/rectifier is grounded
3. To ensure there is enough water for water cooling type power supply/rectifier
4. We advice that all rectifiers should be isolated to increase of its life.
Other advantages
1. Cabinet
a: Adopting completely digitalized machining
b: Adopting cold rolled production of iron steel sheet, after phosphorization, zinc plating, plastic spray, the rectifier gets better structural strength and anti-corrosion.
c: Reasonable structure design, isolated inverter design, rectification part is convenient to disassemble and mend because of its neat assembling.
d: Radiator gets better cooling effect because of its 1.5 times capacity.
2 Electric control system
a: The rectifier adopts full bridge phase-shifted soft switch control, ensuring the lowest power loss of IGBT. The capacity of IGBT become 3 times bigger.
b: The main transformer. It adopts amorphous core to increase transformer efficiency and cool transformer, and not only can lighten rectifier weight, but also can strengthen rectifier stability and reliability. At its elementary stage, it adopts series blocking capacitor.
c: Magnetic deviation automatic correction circuit is adopted and the total power of magnetic core gets enlarged 1.5 times.
3 Schottky Barrier Diode
a: It has been expanded 4 times.
4 All the controlling boards get antiseptic treatment with imported lacquer.
Anodizing introduction；
Anodizing is an electrolytic passivation process that is used to increase the thickness of the natural oxide layer on the surface of metal parts. Aluminium alloys are anodized to increase corrosion resistance and surface hardness, as well as to allow dyeing (colouring), improved lubrication, or improved adhesion. Different anodizing processes include hard anodizing, chromic acid anodizing (CAA), sulphuric acid anodizing (SAA), boric sulphuric acid anodizing (BSAA), tartaric sulphuric acid anodizing (TSAA) and phosphoric acid anodizing (PAA)
Product Tags:
|
|
1 Phase Anodizing Aluminum Plating Rectifiers 30v 300a Images
|
